德国罗德斯高速机后处理分享!
:L这是罗德斯后处理 ? # Post Name : MPFAN# Product : MILL
# Machine Name : FANUC
# Control Name : 6M
# Description : FANUC 6M POST
# Associated Post :
# Mill/Turn : NO
# 4-axis/Axis subs. : YES
# 5-axis : NO
# Executable : MP
# --------------------------------------------------------------------------
#| MASTERCAM MP POST PROCESSOR | Always back up your post-processor |
#| CNC Software, Inc. | prior to making any changes. It's easy, |
#| Control Model: FANUC 6M+ | just put a floppy in drive a:, at DOS |
#| Machine Model: GENERIC | type "COPY C:\MILL55\*.PST A:" |
#| PST File Name: MPFAN.PST/TXT | |
#| Executable : MP.EXE 3.12 | |
# --------------------------------------------------------------------------
#
# ---------------
#| REVISION LOG|
# ------------------------------------------------------------------------
# Programmers Note:
# CNC5/12/94-Initial post setup for Mill5
#$Lgb$
# 1.0 Jph 08/19/94 Initial source control check-in
# 1.1 jph 08/24/94 Correct coolant text
# 1.2 jph 09/02/94 Ques. 86. was 0.2 delay
# 1.3 pdr 09/06/94 Updated and corrected numbered questions
# 1.4 pdr 09/07/94 Updated reverse post name (q 93.)
# 1.5 jph 09/09/94 Updated drillcycle end Z pos.
# 1.6 jph 11/04/94 Remove question for cfg file
#$Lge$
#
# ---------------
#| FEATURES: |
# ------------------------------------------------------------------------
# Users Note:
#
# Following Misc_Reals & Misc_Integers are used:
#
# mi1 - Work coordinate system
# 0 = Reference return is generated and G92 with the
# X, Y and Z home positions at file head.
# 1 thru 3 = Reference return is generated and G92 with the
# X, Y and Z home positions at each tool.
# 4 thru 9 = The WCS of G54 thru G59 respectively at each tool.
#
# Options / Usage:
# It is recommended to start and end cutter compensation on a linear move.
# Rotary axis assumes a "Z" plunge at feed into part, position of the
# substituted axis at absolute zero position and the retraction from path
# by the post call to the G28 machine Z home position.
# --------------------------------------------------------------------------
# DEBUG/PROGRAM SWITCHES, debugging and program switches
# --------------------------------------------------------------------------
bug1 : 1 # 1 = Output post to screen, 2 = output leader to screen
bug2 : 0 # Append postline labels, non-zero is column position?
bug3 : 0 # Append whatline no. to each NC line?
bug4 : 0 # Append NCI line no. to each NC line?
whatno : yes # Do not perform whatline branches?
get_1004 : 1 #Find gcode 1004 with getnextop?
rpd_typ_v7 : 1 #Use Version 7 style contour flags?
strtool_v7 : 2 #Use Version 7 toolname?
arcoutput : 0 # 0 = IJK, 1 = R no sign, 2 = R signed neg. over 180
breakarcs : 0 #Break arcs, 0 = no, 1 = quadrants, 2 = 180deg. max arcs
stagetool : 0 # 0 = Do not pre-stage tools, 1 = Stage tools
use_gear: no # Set to yes to output gear range codes
谢谢分享:) 回复 4# vinney777
到处可以见到你的身影,帮帮去看看http://www.postp.net/viewthread.php?tid=8216这个怎么改。 这是四轴的后处理吧 找了好久,下来看看 94年的后处理,有点老了 我要西门子啊,新人没办法啊,要一个东西 前后扣了我好多个G币 的的的得的的的的的的
页:
[1]
2