mastercam9.1的后处理升级成X5的

大树 · 发表于 2011-11-6 21:52:23

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区

您需要登录才可以下载或查看，没有账号？立即注册

×

升级完后怎么还是有一些不小的问题。比如没有坐标输出，行号啊之类的。如何更改

若枫 · 发表于 2011-11-6 22:45:15

回复 1# 大树

修改机器控制器

梦妮 · 发表于 2011-11-7 11:53:03

指点下怎么能把9.1升级到X5 谢谢

梦妮 · 发表于 2011-11-7 11:54:08

指点下怎么能把9.1升级到X5 谢谢

若枫 · 发表于 2011-11-7 17:03:19

回复 4# 梦妮

X5 Post Update Notes (Windows XP)
Updating pst and psb files for X5
It does not appear that there are any common post fixes for X5 if updating posts from X4. Post updates directly from versions prior to X4 can be attempted, but issues may arise. If there are any changes in post functionality, please contact In‐House Solutions Inc. for further assistance.
1. Run the UpdatePost.dll Chook.
2. Select the post type. • Some posts for Mastercam Router are actually “Mill” post type. If a message is displayed indicating
you have selected the wrong post type, cancel the update and change the post type to Mill. • When updating any posts for Mastercam Lathe, select Lathe(Mill/Turn).
3. Set the version of Mastercam you are updating the post from.
4. The target folder should be set to the correct location by default. If it is not, uncheck ‘Change target folder based on post type’ and set the target location.
5. Click ‘Select Post’ and select the pst file from the previous version to be updated to X5. The psb file will be updated automatically.
6. Select ‘Create Log File’ and ‘Display Log File’.
7. Click the checkmark.
8. If errors are encountered, attempt to resolve the errors based on the error messages. Otherwise, save the log file and send it to your Mastercam reseller.

Updating Machine and Control Defintions from Previous Mastercam Versions Machine Definitions: .mmd, .lmd, .rmd, .wmd, Control Definitions: .control
1 In the file menu, select ‘Update Folder’.

2 In the update folder dialog, apply the settings shown in the image below.

a. For typical installs of Mastercam X5, the source folder should be the location of your previous machine and control definitions:
C:\mcamx\CNC_MACHINES
The destination folder must also be set manually to the new location for machine and control definitions:
C:\Documents and Settings\All Users\Documents\shared mcamx5\CNC_MACHINES

b. Alternatively, you could place your machine and control definition files in the proper location for X5 prior to updating them and apply the settings shown in the image below. The source folder should be:
C:\Documents and Settings\All Users\Documents\shared mcamx5\CNC_MACHINES

3. Remove the original machine and control definitions from the target folder and keep them as backup.
Where are the NC files?
For a standard Mastercam X5 install, posted NC files can be found in the following folder:
C:\Documents and Settings\<user>\My Documents\my mcamx5\<Product>\NC
<Product> refers to the Mastercam environment you are using. • Mill, Lathe, Router or Wire
Where to put posts and machine and control definition files (.mmd, .lmd, .rmd, .wmd, .control)?
For a standard Mastercam X5 install, machine and control definition files should be put into the folder:
C:\Documents and Settings\All Users\Documents\shared mcamx5\CNC_MACHINES
Posts should be put in the following location:
C:\Documents and Settings\All Users\Documents\shared mcamx5\<Product>\Posts

(WinXP) Post Updating Machine and Control Definitions for Mastercam X5.zip (132.73 KB, 下载次数: 19)

西班牙 · 发表于 2011-11-7 21:14:10

回复 5# 若枫

我下一个看看如何

scrollex · 发表于 2011-11-13 15:13:22

升级后有很多问题，我想用X5的直接改可能会比较好。因为语句有很多变化。

yanglinchu · 发表于 2011-11-13 23:52:30

新手报到，学习中。

yanglinchu · 发表于 2011-11-14 00:01:20

我有官方的9.1后处理，西门子四轴车铣复合。哪位需要请联系我。此外，我也需要学习如何升级该后处理。请高手指导，谢谢！

cbkwxf · 发表于 2011-11-21 15:53:46

。。。。。。。。。。。。。。。。。。。。。。。。。

账号		自动登录	找回密码
密码			立即注册

[讨论] mastercam9.1的后处理升级成X5的

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区

评分

浏览过的版块

站长推荐 /2